Descripción
- The OpenCM 485 Expansion Board connects to the OpenCM9.04 controller.
- The OpenCM9.04 controller board is required in order to use the OpenCM 485 Expansion Board.
- (The OpenCM9.04 controller supports Dynamixels using RS-485 and TTL.)
- Battery connectors for LIPO and Li-ion batteries can be connected as well as the SMPS connector.
- There is a wide range of input voltage to connect various Dynamixels.
Please purchase the OpenCM9.04A or the OpenCM9.04B separately.
HARDWARE SPECIFICATIONS
|
Description |
Specification |
|
Size |
68 mm X 66.5 mm x 16 mm |
|
Weight |
32 g |
|
Input Voltage |
5~30V |
|
Power |
SMPS, LIPO, DXL PRO 24V |
|
Power Switch |
1 |
|
DYNAMIXEL Port |
4Pin x 5, 3Pin x 5 |
|
Buttons |
2 |
|
LED |
5 |
COMPATIBLE PRODUCTS
- Controller : OpenCM9.04-A/B
- Dynamixels : All products sold from ROBOTIS
- External Sensor : All sensors sold from ROBOTIS
WARNINGS
- Please read the e-Manual before usage to correctly use the OpenCM 485 Expansion Board.
- ROBOTIS OpenCM IDE V 1.0.1 or higher must be used.
Valoraciones
No hay valoraciones aún.